Low Profile Range

Ordering Guide

Ordering Code Battery Type Battery Configuration
ECL4/240/4.8/4.5-A NiCd 4.8V 4.5AH Cane
ECL4/240/4.8/4.5-A+A NiCd 4.8V 4.5AH Cane + Cane

Our Slimmest Conversion Kit That Can Be Easily Concealed in the Fluorescent Fitting

  • Suitable for T5, T8, CFL and 2D fluorescent lamps
  • Extra low standby power consumption
  • Short circuit protection
  • Five-pole relay configuration
  • Low profile casing (22mm x 28mm cross-section)
  • Ballast control output ensures compatability with most high frequency ballast
  • Automatically activated in the event of power cuts
  • Offer a good luminous flux to facilitate the evacuation
Mode of Operation Maintained / Non maintained
Lamp Type T5, T8 Fluorescent, 4 Pin CFL and 2D Lamps
Rated Duration 3 Hours
Supply Voltage 220 - 240V, 50 - 60Hz
Supply Current 20mA
Power Consumption < 2.0W
Trickle Charge 125mA / 225mA
Battery Charger Regulated variable rate
Battery Protection Low Battery Voltage Cut-off (Prevents Battery Over Discharge)
Battery Type High Temp Nickel-Cadmium (NiCd) / Nickel-Metal Hydride (NiMH)
Charge Monitor LED
Test Facility Momentary test switch
Casing Construction Electro-galvanised steel
Max. Casing Temp, Tc 70°C
Max. Ambient Temp, Ta 50°C
Standards / Compliance IEC 61347-2-7 (SS 490-2-7), SS 563
Project References